Evaluations of bioactivity and mechanical properties of poly (epsilon-caprolactone)/silica nanocomposite following heat treatment.

Abstract

A composite material consisting of poly(epsilon-caprolactone) (PCL) and silica was prepared and evaluated as a bioactive bone substitute. The composite was synthesized by the co-condensation of tetraethyl orthosilicate and PCL and end-capped with triethoxysilane (Si-PCL). The as-prepared specimens were subjected to an initial heat treatment of 2 days at 60 degrees C, followed by further heat-treatments at 100 degrees C, 150 degrees C, and 200 degrees C for 24 h. The tensile mechanical properties of the heat-treated specimens were determined, and additional specimens were exposed to a simulated body fluid (SBF) for different periods of time. The SBF exposure led to the deposition of a layer of apatite crystals on the surface of the composites. It was found that increasing the second heat-treatment temperature produced an increase in tensile strength and Young's modulus of the composite but a decrease in the initial rate of apatite formation. These phenomena are explained in terms of the condensation reaction that takes place between the silanol groups in the silica and Si-PCL as the heat-treatment temperature is increased.