Ultra rapid prototyping of microfluidic systems using liquid phase photopolymerization.

Abstract

We present a method for the ultra rapid prototyping of microfluidic systems using liquid phase photopolymerization, requiring less than 5 min from design to prototype. Microfluidic device fabrication is demonstrated in a universal plastic or glass cartridge. The method consists of the following steps: introduction of liquid prepolymer into the cartridge, UV exposure through a mask to define the channel geometry, removal of unpolymerized prepolymer, and a final rinse. Rapidly fabricated masters for polydimethylsiloxane micromolding are also demonstrated. The master making process is compared to SU-8 50 photoresist processes. Press-on connectors are developed and demonstrated. All materials used are commercially available and low cost. An extension of these methods (mix and match) is presented that allows for maximal design flexibility and integration with a variety of existing fluidic geometries, components, and processes.