Fabrication of highly-ordered TiO(2) nanotube arrays and their use in dye-sensitized solar cells.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 19166289.
- Also identified by DOI 10.1021/nl802818d.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Highly ordered TiO(2) nanotubes were successfully fabricated using a nanoporous alumina templating method. A modified sol-gel route was used to infiltrate the alumina pores with Ti(OC(3)H(7))(4) which was subsequently converted into TiO(2) nanotubes. The average external diameter, tube lengths, and wall thickness achieved were 295 nm, 6-15 microm, and 21-42 nm, respectively. Diffraction data reveals that the nanotubes consist solely of the anatase phase. Dye-sensitized solar cells using TiO(2) nanotube arrays as the working electrode yielded power conversion efficiencies as high as 3.5% with a maximum incident photon-to-current conversion efficiency of 20% at 520 nm.