Sensing mechanisms for carbon nanotube based NH3 gas detection.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 19281216.
- Also identified by DOI 10.1021/nl803930w.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
There has been an argument on carbon nanotube (CNT) based gas detectors with a field-effect transistor (FET) geometry: do the response signals result from charge transfer between adsorbed gas molecules and the CNT channel and/or from the gas species induced Schottky barrier modulation at the CNT/metal contacts? To differentiate the sensing mechanisms, we employed three CNTFET structures, i.e., (1) the entire CNT channel and CNT/electrode contacts are accessible to NH(3) gas; (2) the CNT/electrode contacts are passivated with a Si(3)N(4) thin film, leaving the CNT channel open to the gas and, in contrast, (3) the CNT channel is covered with the film, while the contacts are open to the gas. We suggest that the Schottky barrier modulation at the contacts is the dominant mechanism from room temperature to 150 degrees C. At higher temperatures, the charge transfer process contributes to the response signals. There is a clear evidence that the adsorption of NH(3) on the CNT channel is facilitated by environmental oxygen.