High carrier densities achieved at low voltages in Ambipolar PbSe nanocrystal thin-film transistors.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 19775167.
- Also identified by DOI 10.1021/nl902062x.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Efficient transport of both electrons and holes with high carrier densities is a requirement for obtaining light-emitting transistors from films of colloidal semiconductor nanocrystals. Such devices offer an approach to efficient electrically pumped nanocrystal lasers with tunable emission. Here, we report a low-voltage ambipolar thin-film transistor that features high carrier mobility and high induced carrier density by combining a PbSe nanocrystal film with a high-capacitance ion-gel gate dielectric layer ( approximately 22 and approximately 9 microF/cm2 for electron and hole accumulation, respectively). At operation voltages below 2.5 V, electron and hole densities higher than approximately 10(14) carriers/cm2 could be achieved in the PbSe nanocrystal film, which corresponds to approximately 3 electrons or holes per particle. Carrier mobilities were also dependent on charge density and were as high as 0.4 and 0.02 cm2/(V s) for electrons and holes, respectively.