Percutaneous pulmonary polyurethane valved stent implantation.

Abstract

Transfemoral application of pulmonary heart valves has been studied for the past 10 years. Nevertheless, size restriction of percutaneous heart valved stents is still imminent. In this study we implanted percutaneously a novel, low-profile polyurethane valved stent. Percutaneous implantation in pulmonary position was evaluated in 7 sheep. The new valved stent fits into a 14F delivery device. The self-expanding nitinol stent was produced by using a dip-coating technique, and a modified commercially available endovascular stent graft system served as a delivery device. The valved stents were deployed directly over the native pulmonary valve under fluoroscopic control. Transthoracic echocardiography was performed after 4 weeks. At the time of explantation, the animals were reanalyzed and killed. Angiography was performed at implantation and at the end of the study. Explanted constructs were analyzed macroscopically and microscopically. Angiography and echocardiography in all animals demonstrated orthotopic position of the stents at the time of implantation and after 4 weeks. During the deployment procedure, rhythm disturbances occurred in all animals. The peak-to-peak transvalvular gradient was 2.3 +/- 1.2 mm Hg initially and 4.1 +/- 2.4 mm Hg at follow-up. One-month follow-up confirmed competent neovalves without any paravalvular leakage. Gross morphology demonstrated good opening and closure characteristics. No calcification was seen macroscopically, and surrounding tissue was free of calcification. In the present study we demonstrated successful merging of 2 novel technologies for percutaneous treatment of pulmonary valve diseases using polyurethane stent valve constructs.