A rapid prototyping technique for valves and filters in centrifugal microfluidic devices.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 19823732.
- Also identified by DOI 10.1039/b908683h.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Using short lengths of fused silica capillary tubing embedded in the disk, a system for valving and filtering samples on centrifugal microfluidic devices has been designed and implemented. Sedimentation of turbid samples and transfer of the clear supernatant was also accomplished. Also demonstrated is the transfer of the liquid through a second capillary valve to the final reservoir. By controlling rotational speed, sedimentation and multiple step valving operations are readily implemented and easily prototyped.