Fabrication of sub-5 nm nanochannels in insulating substrates using focused ion beam milling.

Abstract

The use of focused ion beam (FIB) milling to fabricate nanochannels with critical dimensions extending below 5 nm is described. FIB milled lines have narrowing widths as they are milled deeper into a substrate. This focusing characteristic is coupled with a two-layered architecture consisting of a relatively thick (>100 nm) metal film deposited onto a substrate. A channel is milled through the metal layer until it penetrates a prescribed depth into the substrate material. The metal is then removed, leaving a nanochannel with smooth surfaces and lateral dimensions as small as sub-5 nm. These open nanochannels can be sealed with a cover plate and the resulting devices are well-suited for single-molecule DNA transport studies. This methodology is used with quartz, single-crystal silicon, and polydimethylsiloxane substrates to demonstrate its general utility.