Improved hydrogen storage kinetics of nanoconfined NaAlH₄ catalyzed with TiCl₃ nanoparticles.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 21446760.
- Also identified by DOI 10.1021/nn200643b.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Nanoparticles of NaAlH(4) have been infiltrated in nanoporous carbon aerogel with TiCl(3) nanoparticles in order to explore possible synergetic effects between nanoconfinement and a functionalized catalytic scaffold. Resorcinol formaldehyde carbon aerogels with an average pore size of 17 nm and total pore volume of 1.26 mL/g were infiltrated with TiCl(3) to obtain an aerogel doped with 3.0 wt % TiCl(3) nanoparticles. NaAlH(4) was melt-infiltrated into the functionalized carbon aerogel at 189 °C and p(H(2)) ∼ 186-199 bar. Energy-dispersive spectrometry (EDS) combined with focused ion beam (FIB) techniques revealed the presence of Na, Al, Ti, and Cl inside the aerogel scaffold material. The infiltrated NaAlH(4) was X-ray amorphous, whereas (27)Al magic-angle spinning (MAS) NMR spectroscopy confirmed the presence of nanoconfined NaAlH(4). Temperature-programmed desorption mass spectroscopy (TPD-MS) and Sieverts' measurements demonstrated significantly improved hydrogen desorption kinetics for this new nanoconfined NaAlH(4)-TiCl(3) material as compared to nanoconfined NaAlH(4) without the catalysts TiCl(3) and to bulk ball-milled samples of NaAlH(4)-TiCl(3). We find that the onset temperature for hydrogen release was close to room temperature (T(onset) = 33 °C), and the hydrogen release rate reached a maximum value at 125 °C, which demonstrates favorable synergetic effects between nanoconfinement and catalyst addition.
Medical subject headings
- Chlorine
- Hydrogen
- Nanostructures
- Titanium