Highly enhanced energy conversion from the streaming current by polymer addition.

Abstract

In this contribution, we present for the first time the experimental results of energy conversion from the streaming current when a polymer is added to the working solution. We added polyacrylic acid (PAA) in concentrations of 200 ppm to 4000 ppm to a KCl solution. By introducing PAA, the input power, which is the product of volumetric flow rate and the applied pressure, reduced rapidly as compared to the case of using only a normal viscous electrolyte KCl solution. The output power at the same time remained largely constant, whereby an increase of the streaming current and a decrease of the streaming potential simultaneously occurred. These combined factors led to the massive increase of the energy conversion efficiency. Particularly, the results showed that when PAA was in a 0.01 mM KCl solution, the energy conversion efficiency of the system was enhanced by a factor of 447 (±2%), as compared to the case of the solution containing only 0.01 mM KCl. An enhancement factor of 249 (±4%) was also observed when PAA was added to the higher ionic strength background solution, 1 mM KCl. This finding can have practical use in microchannel-array energy conversion systems. When, instead of the negatively charged PAA, a non-ionic polymer polyethylene oxide (PEO) was added to the solution, no efficiency increase was observed, probably due to polymer wall adsorption.