Individual density-elasticity relationships improve accuracy of subject-specific finite element models of human femurs.

Abstract

In a previous study on subject-specific finite-element-models, we found that appropriate density-elasticity relationships to compute the mechanical behavior of femurs seem to be subject-specific. The purpose of this study was to test the hypothesis that the predictive error of a cohort of subject-specific finite element-models is lower with subject-specific density-elasticity relationships than with a cohort-specific density-elasticity relationship. Finite-element-analysis and inverse optimization based on response surface methodology were employed to test the hypothesis. Subject-specific FE-models of 17 human femurs and corresponding experimental data from biomechanical tests were taken from a previous study. A power function for the relation between radiological bone density and elastic modulus was set up with the optimization variables a and b: E(MPa)=aρqCT(b)(gK2HPO4/cm(3)). The goal of the optimization was to minimize the root-mean-square error in percent (RMSE%) between computational and experimental results. A Wilcoxon test (p=0.05) was performed on all absolute relative errors between the two groups (subject-specific functions vs. cohort-specific function). The subject-specific functions resulted in a 6% lower overall prediction error and a 6% lower RMSE% than the cohort-specific function (p<0.001). The determined subject-specific relations were mostly linear, with variable a ranging from 9307 to 15673 and variable b ranging from 0.68 to 1.40. For the cohort-specific relation, the following power law was obtained: E(MPa)=12486ρqCT(1.16)(gK2HPO4/cm(3)). We conclude that individual density-elasticity relationships improve the accuracy of subject-specific finite element models. Future subject-specific finite-element-analyses of bones should include the individuality of the elastic properties by a stochastic density-elasticity relationship with mean and standard deviation of a and b.