Fatigue failure at the disc-vertebra interface during cyclic axial compression of cadaveric specimens.
biomechanical · Level V
Where this comes from
- Record sourced from PubMed, PMID 23916133.
- Also identified by DOI 10.1016/0268-0033(94)90037-X.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Seven specimens of adjacent lumbar vertebrae, with the disc between them, were obtained from five cadavers (age 40-80 years). The vertebrae were bisected in the transverse plane, posterior elements were removed and the specimens subjected to cyclic compression, with a peak load of 1.9 kN at a frequency of 0.5 Hz. During loading, the bulging of the end-plate into the more caudal of the two vertebrae was monitored using a displacement transducer. Application of the load was continued for 7000 cycles, or until the end-plate displacement reached 1.5 mm, whichever happened first. One specimen did not fail; another failed within only five loading cycles, i.e. not by fatigue. The remaining five specimens showed signs of fatigue failure but the end-plate remained intact.