Suppression of phase coarsening in immiscible, co-continuous polymer blends under high temperature quiescent annealing.

Abstract

The properties of polymer blends greatly depend on the morphologies formed during processing, and the thermodynamic non-equilibrium nature of most polymer blends makes it important to maintain the morphology stability to ensure the performance stability of structural materials. Herein, the phase coarsening of co-continuous, immiscible polyamide 6 (PA6)-acrylonitrile-butadiene-styrene (ABS) blends in the melt state was studied and the effect of introduction of nano-silica particles on the stability of the phase morphology was examined. It was found that the PA6-ABS (50/50 w) blend maintained the co-continuous morphology but coarsened severely upon annealing at 230 °C. The coarsening process could be divided into two stages: a fast coarsening process at the initial stage of annealing and a second coarsening process with a relatively slow coarsening rate later. The reduction of the coarsening rate can be explained from the reduction of the global curvature of the interface. With the introduction of nano-silica, the composites also showed two stages of coarsening. However, the coarsening rate was significantly decreased and the phase morphology was stabilized. Rheological measurements indicated that a particle network structure was formed when the concentration of nano-silica particles was beyond 2 wt%. The particle network inhibited the movement of molecular chains and thus suppressed the coarsening process.