Radially aligned hierarchical columnar structure as a cathode material for high energy density sodium-ion batteries.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 25882619.
- Also identified by DOI 10.1038/ncomms7865.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Delivery of high capacity with good retention is a challenge in developing cathodes for rechargeable sodium-ion batteries. Here we present a radially aligned hierarchical columnar structure in spherical particles with varied chemical composition from the inner end (Na[Ni0.75Co0.02Mn0.23]O2) to the outer end (Na[Ni0.58Co0.06Mn0.36]O2) of the structure. With this cathode material, we show that an electrochemical reaction based on Ni(2+/3+/4+) is readily available to deliver a discharge capacity of 157 mAh (g-oxide)(-1) (15 mA g(-1)), a capacity retention of 80% (125 mAh g(-1)) during 300 cycles in combination with a hard carbon anode, and a rate capability of 132.6 mAh g(-1) (1,500 mA g(-1), 10 C-rate). The cathode also exhibits good temperature performance even at -20°C. These results originate from rather unique chemistry of the cathode material, which enables the Ni redox reaction and minimizes the surface area contacting corrosive electrolyte.