Investigating the effect of TiO<sub>2</sub> on the structure and biocompatibility of bioactive glass.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 26344203.
- Also identified by DOI 10.1002/jbm.b.33521.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Titanium (Ti<sup>4+</sup> ) containing materials have been widely used in medical applications due to its associated bioactivity in vivo. This study investigates the replacement of Si<sup>4+</sup> with Ti<sup>4+</sup> within the system SiO<sub>2</sub> -Na<sub>2</sub> O-CaO-P<sub>2</sub> O<sub>5</sub> to determine its influence on glass structure. This strategy was conducted in order to control the glass solubility to further improve the cellular response. Ti<sup>4+</sup> incorporation was found to have little influence on the glass transition temperature (T<sub>g</sub> = 520 ± 8°C) and magic angle spinning-nuclear magnetic resonance (MAS-NMR) shifts (-80 ppm) up to additions of 18 wt %. However, at 30 wt % the T<sub>g</sub> increased to 600°C and MAS-NMR spectra shifted to -88 ppm. There was also an associated reduction in glass solubility as a function of Ti<sup>4+</sup> incorporation as determined by inductively coupled plasma optical emission spectroscopy where Si<sup>4+</sup> (1649-44 mg/L) and Na<sup>+</sup> (892-36 mg/L) levels greatly reduced while Ca<sup>2+</sup> (3-5 mg/L) and PO43- (2-7 mg/L) levels remained relatively unchanged. MC3T3 osteoblasts were used for cell culture testing and it was determined that the Ti<sup>4+</sup> glasses increased cell viability and also facilitated greater osteoblast adhesion and proliferation to the glass surface compared to the control glass. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1703-1712, 2016.
Medical subject headings
- Ceramics
- Materials Testing
- Osteoblasts
- Titanium