Adhesive strength of bioactive oxide layers fabricated on TNTZ alloy by three different alkali-solution treatments.

Abstract

Bioactive oxide layers were fabricated on Ti-29Nb-13Ta-4.6Zr alloy (TNTZ) by three different alkali solution treatments: hydrothermal (H), electrochemical (E), and hydrothermal-electrochemical (HE). The adhesive strength of the oxide layer to the TNTZ substrate was measured to determine whether this process achieves sufficient adhesive strength for implant materials. Samples subjected to the HE process, in which a current of 15mA/cm(2) was applied at 90°C for 1h (HE90-1h), exhibited a comparatively higher adhesive strength of approximately 18MPa while still maintaining a sufficiently high bioactivity. Based on these results, an oxide layer fabricated on TNTZ by HE90-1h is considered appropriate for practical biomaterial application, though thicker oxide layers with many cracks can lead to a reduced adhesive strength.