Microcavity-Integrated Carbon Nanotube Photodetectors.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 27379375.
- Also identified by DOI 10.1021/acsnano.6b02898.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Carbon nanotubes (CNTs) are considered to be highly promising nanomaterials for multiwavelength, room-temperature infrared detection applications. Here, we demonstrate a single-tube diode photodetector monolithically integrated with a Fabry-Pérot microcavity. A ∼6-fold enhanced optical absorption can be achieved, because of the confined effect of the designed optical mode. Furthermore, taking advantage of Van-Hove-singularity band structures in CNTs, we open the possibility of developing chirality-specific (n,m) CNT-film-based signal detectors. Utilizing a concept of the "resonance and off-resonance" cavity, we achieved cavity-integrated chirality-sorted CNT-film detectors working at zero bias and resonance-allowed mode, for specific target signal detection. The detectors exhibited a higher suppression ratio until a power density of 0.07 W cm(-2) and photocurrent of 5 pA, and the spectral full width at half-maximum is ∼33 nm at a signal wavelength of 1200 nm. Further, with multiple array detectors aiming at different target signals integrated on a chip, a multiwavelength signal detector system can be expected to have applications in the fields of monitoring, biosensing, color imaging, signal capture, and on-chip or space information transfers. The approach can also bring other nanomaterials into on-chip or information optoelectronics, regardless of the available doping polarity.