Tuning the sound speed in macroporous polymers with a hard or soft matrix.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 28589203.
- Also identified by DOI 10.1039/c7sm00744b.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
In this paper, we investigate the factors affecting the sound speed in air-filled macroporous polymer materials at ultrasound frequencies. Due to the presence of large proportion of gas, these porous materials present high compressibility and, as a consequence, low sound speed which may fall down to values as low as 40 m s<sup>-1</sup>. Using an emulsion-templating method, we synthesize macroporous samples with similar porous structures but with three different matrices, i.e. a hard poly(styrene-divinylbenzene (DVB)) matrix, a soft epoxy-modified polydimethylsiloxane (PDMS) matrix and a very soft polyaddition PDMS matrix. We characterize the matrix mechanical properties by measuring both the bulk modulus K<sub>0</sub> and the shear modulus G<sub>0</sub>. Next, we compare the sound speed measured in porous samples with porosity varying from 0 to 50%. We show that, in agreement with theoretical predictions, the sound speed is mainly controlled by two parameters, the porosity value and the K<sub>0</sub>/G<sub>0</sub> ratio of the polymer matrix. These parameters may be used to control the sound propagation in porous polymers, which opens the way to the realization of gradient-index materials.