Influence of screw type and length on fixation of anterior glenoid bone grafts.

Abstract

Bone-grafting procedures for recurrent shoulder instability produce low recurrence rates, although they are associated with complications such as graft non-union. Inadequate screw purchase is considered to play a causative role. However, excessive screw length can endanger neurovascular structures. The present study aimed to investigate how type and length of screws influences construct rigidity in a simplified glenoid model. Testing was performed on composite polyurethane foam models with material properties and abstract dimensions of a deficient glenoid and an bone graft. Three screw types (cannulated 3.75 mm and 3.5 mm and solid 4.5 mm) secured the graft in a bicortical-bicortical, bicortical-unicortical and unicortical-unicortical configuration. Biomechanical testing consisted of applying axial loads when measuring graft displacement. At 200 N, graft displacement reached 0.74 mm, 0.27 mm and 0.24 mm for the unicortical-unicortical and 0.40 mm, 0.25 mm and 0.24 mm for the unicortical-bicortical configuration of the 3.75 mm, 3.5 mm and 4.5 mm screw types. The 3.75 mm screw incurred significant displacements in the unicortical configurations compared to the bicortical-bicortical method (<i>p</i> < 0.001). The present study demonstrates that common screw types resist physiological shear loads in a bicortical configuration. However, the 3.75 mm screws incurred significant displacements at 200 N in the unicortical configurations. These findings have implications regarding hardware selection for bone-grafting procedures.