Electrochemical and biological characterization HA/Al<sub>2</sub> O<sub>3</sub> -YSZ nano-composite coatings using electrophoretic process.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 29532603.
- Also identified by DOI 10.1002/jbm.a.36392.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
In this research work, hydroxyapatite/alumina/YSZ bio nanocomposite coatings on titanium substrate were created by electrophoretic deposition (EPD) and reaction bonding process. By using the EPD process, uniform green form coatings containing HA, yttria-stabilized zirconia (YSZ), and aluminum particles were produced on titanium. After oxidation of aluminum at 660°C and sintering at 850°C, a dense and adherent HA/Al<sub>2</sub> O<sub>3</sub> /YSZ coating was produced. Scanning electron microscopy, X-ray diffractometric and mechanical tests were employed to investigate the morphologies, compositions, hardness, toughness and bonding strength of the coatings. The corrosion studies and cell culturing experiment were carried out and the results show that the HA/YSZ/Al<sub>2</sub> O<sub>3</sub> coatings are more bioactive and more resistance to corrosion than HA coatings. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1916-1922, 2018.
Medical subject headings
- Aluminum Oxide
- Coated Materials, Biocompatible
- Durapatite
- Electrochemistry
- Electrophoresis
- Nanocomposites