Seismic collapse assessment of bridge piers constructed with steel fibers reinforced concrete.

Abstract

Steel fiber is one of the most widely used reinforcements to improve the performance of concrete members. However, few studies have been proposed to study the seismic performance of bridge piers constructed with steel fiber reinforced concrete. This paper presents the collapse vulnerability assessment of typical single bridge piers constructed with steel fibers. Fiber element models of RC bridge piers with and without steel fibers are firstly built by selecting suitable cyclic constitutive laws of steel fiber reinforced concrete, and then calibrated using the experimental results. The seismic capacity and inelastic demand of RC piers with steel fibers are quantified using both nonlinear static pushover analyses and nonlinear incremental dynamic analyses (IDA). In order to conduct the IDA, a suite of 20 earthquake ground motions are selected and scaled to different levels of peak ground acceleration (PGA). Collapse fragility curves are then generated using the maximum drift ratio of piers as the engineering demand parameter (EDP). In order to investigate the impact of various parameters on the collapse fragility curves, six parameters are considered in the parametric study: peak compressive strength of concrete, yield strength of steel, longitudinal reinforcement ratio, axial load ratio, transverse hoops ratio and steel fiber content. It was observed that the concrete strength, longitudinal reinforcement ratio and steel fiber content could significantly affect the collapse fragility curve of the bridge piers with steel fibers.