Improved Outcoupling Efficiency and Stability of Perovskite Light-Emitting Diodes using Thin Emitting Layers.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 30412319.
- Also identified by DOI 10.1002/adma.201805836.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Hybrid organic-inorganic perovskite semiconductors have shown potential to develop into a new generation of light-emitting diode (LED) technology. Herein, an important design principle for perovskite LEDs is elucidated regarding optimal perovskite thickness. Adopting a thin perovskite layer in the range of 35-40 nm is shown to be critical for both device efficiency and stability improvements. Maximum external quantum efficiencies (EQEs) of 17.6% for Cs<sub>0.2</sub> FA<sub>0.8</sub> PbI<sub>2.8</sub> Br<sub>0.2</sub> , 14.3% for CH<sub>3</sub> NH<sub>3</sub> PbI<sub>3</sub> (MAPbI<sub>3</sub> ), 10.1% for formamidinium lead iodide (FAPbI<sub>3</sub> ), and 11.3% for formamidinium lead bromide (FAPbBr<sub>3</sub> )-based LEDs are demonstrated with optimized perovskite layer thickness. Optical simulations show that the improved EQEs source from improved light outcoupling. Furthermore, elevated device temperature caused by Joule heating is shown as an important factor contributing to device degradation, and that thin perovskite emitting layers maintain lower junction temperature during operation and thus demonstrate increased stability.