Ultrasensitive Mid-wavelength Infrared Photodetection Based on a Single InAs Nanowire.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 30817125.
- Also identified by DOI 10.1021/acsnano.8b09649.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
One-dimensional InAs nanowire (NW)-based photodetectors have been widely studied due to their potential application in mid-wavelength infrared (MWIR) photon detection. However, the limited performance and complicated photoresponse mechanism of InAs NW-based photodetectors have held back their true potential for real application. In this study, we developed ferroelectric polymer P(VDF-TrFE)-coated InAs NW-based photodetectors and demonstrated that the electrostatic field caused by polarized ferroelectric materials modifies the surface electron-hole distribution as well as the band structure of InAs NWs, resulting in ultrasensitive photoresponse and a wide photodetection spectral range. Our single InAs NW photodetectors exhibit a high responsivity ( R) of 1.6 × 10<sup>4</sup> A W<sup>-1</sup> as well as a corresponding detectivity ( D*) of 1.4 × 10<sup>12</sup> cm·Hz<sup>1/2</sup> W<sup>-1</sup> at a light wavelength of 3.5 μm without an applied gate voltage, ∼3-4 orders higher than the maximum value of photoresponsivity reported or commercially used MWIR photodetectors. Moreover, our device shows below band gap photoresponse for 4.3 μm MWIR light with R of 9.6 × 10<sup>2</sup> A W<sup>-1</sup> as well as a corresponding D* of ∼8.5 × 10<sup>10</sup> cm·Hz<sup>1/2</sup> W<sup>-1</sup> at 77 K. Our study shows that this approach is promising for fabrication of high-performance NW-based photodetectors for MWIR photon detection.