Acetabulum Cup Stability in an Early Weight-Bearing Cadaveric Model of Geriatric Posterior Wall Fractures.

Abstract

Primary total hip arthroplasty (THA) has been suggested for posterior wall (PW) fractures with unfavorable features in the geriatric population. There is a paucity of studies reporting on postoperative protocols for primary THA after PW fractures. The purpose of this study was to test the biomechanical effect of immediate assisted weight-bearing on acetabulum THA cup fixation in an osteoporotic PW fracture model. Computed tomography scans of 18 geriatric PW fractures (mean age, 77 ± 8 years) were used to generate representative PW fracture. This fracture pattern, comprising 50% of the PW and 25% of the acetabulum rim, was then created in 6 female cadaveric pelves. A multihole acetabulum THA cup was implanted with line-to-line reaming and fixed with four 5-mm screws. The pelves were cyclically loaded to up to 1.8× body weight (BW) in the intact form, after fracture creation and fracture fixation. Optical markers were used to determine acceptable cup motion of less than 150 μm. Five specimens withstood 3.6× BW loading after implantation and before fracture creation. At 1.8× BW load, cup motion was nonfractured: 50 ± 24 µm (range, 5-128 µm), fractured with no fixation: 37 ± 22 µm (range, 8-74 µm), or fractured with fixation: 62 ± 39 µm (range, 5-120 µm) (P = 0.0097). Cup motion was <150 µm for all groups. This study supports the practice of allowing immediate assisted weight-bearing in patients undergoing THA with PW fractures involving up to 50% of the PW and up to 25% of the acetabular rim, with or without fixation of the PW fragment.