Improved accuracy of biomechanical motion data obtained during impacts using a time-frequency low-pass filter.
biomechanical · Level V
Where this comes from
- Record sourced from PubMed, PMID 31983403.
- Also identified by DOI 10.1016/j.jbiomech.2020.109639.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Biomechanical motion data involving impacts are not adequately represented using conventional low-pass filters (CF). Time-frequency filters (TFF) are a viable alternative, but have been largely overlooked by movement scientists. We modified Georgakis and Subramaniam's (2009) fractional Fourier filter (MFrFF) and demonstrated it performed better than CFs for obtaining lower leg accelerations during football instep kicking. The MFrFF displayed peak marker accelerations comparable to a reference accelerometer during foot-to-ball impact (peak % error = -5.0 ± 11.4%), whereas CFs severely underestimated these peaks (30-70% error). During the non-impact phases, the MFrFF performed comparably to CFs using an appropriate (12-20 Hz) cut-off frequency (RMSE = 37.3 ± 7.6 m/s<sup>2</sup> vs. 42.1 ± 11.4 m/s<sup>2</sup>, respectively). Since accuracy of segmental kinematics is fundamental for understanding human movement, the MFrFF should be applied to a range of biomechanical impact scenarios (e.g. locomotion, landing and striking motions) to enhance the efficacy of study in these areas.
Medical subject headings
- Mechanical Phenomena
- Movement