A Pyrite Iron Disulfide Cathode with a Copper Current Collector for High-Energy Reversible Magnesium-Ion Storage.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 34436798.
- Also identified by DOI 10.1002/adma.202103881.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Owing to its low cost, high theoretical capacity, and environmentally friendly characteristics, pyrite FeS<sub>2</sub> demonstrates promise as a cathode material for high-energy metal-anode-based rechargeable batteries. When it is used in a rechargeable magnesium battery (RMB), the electrode couple exhibits an extremely low theoretical volume change upon full discharge. However, its electrochemical Mg-ion storage is considerably hindered by slow reaction kinetics. In this study, a high-performance FeS<sub>2</sub> cathode for RMBs using a copper current collector is reported, which is involved in cathode reactions via a reversible redox process between copper and cuprous sulfide. This phase transformation with the formation of copper nanowires during discharge activates the redox reactions of FeS<sub>2</sub> via a two-step and four-electron Mg-ion transfer that dominates the cathode reactions. As a result, the as-prepared FeS<sub>2</sub> nanomaterial cathode delivers a significantly enhanced reversible capacity of 679 mAh g<sup>-1</sup> at 50 mA g<sup>-1</sup> . The corresponding energy density of 714 Wh kg<sup>-1</sup> is superior to those of all previously reported metal chalcogenide cathodes in RMBs or hybrid batteries using a Mg metal anode. Notably, the as-assembled FeS<sub>2</sub> -Mg battery can operate over 1000 cycles with a good capacity retention at 400 mA g<sup>-1</sup> .