Influence of balloon location during proximal optimization technique (POT): A finite element analysis.

Abstract

Proximal Optimization Technique (POT)is a post-expansion technique that must be completed after single-stent implantation for the coronary bifurcation. The optimal location for the distal balloon shoulder during POT remains debatable. In the present study, the finite element method is applied to simulate POT after single-stent implantation in the coronary bifurcation. Three different balloon locations based on the distal shoulder relative to the carina cut plane were analyzed: 1) "proximal":1mm before carina cut plane; 2) "standard": at the carina cut plane; and 3) "distal": 1 mm after the carina cut plane. The computational results showed differences in stent, vessel morphology, and vessel wall stress due to the different balloon locations. However, when distal balloon shoulder was located between two adjacent stent rings, it formed the distal cell of the stent, the best stent apposition, least stent structs obstruction at SB ostial. Moreover, best opening effect of distal cell of the stent can be achieved, with the least damage to the vessel wall.