Perovskite Light-Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual-Additive Strategy for Defect Passivation and Nanostructure Regulation.

Abstract

Quasi-2D perovskites have long been considered to have favorable "energy funnel/cascade" structures and excellent optical properties compared with their 3D counterparts. However, most quasi-2D perovskite light-emitting diodes (PeLEDs) exhibit high external quantum efficiency (EQE) but unsatisfactory operating stability due to Auger recombination induced by high current density. Herein, a synergetic dual-additive strategy is adopted to prepare perovskite films with low defect density and high environmental stability by using 18-crown-6 and poly(ethylene glycol) methyl ether acrylate (MPEG-MAA) as the additives. The dual additives containing COC bonds can not only effectively reduce the perovskite defects but also destroy the self-aggregation of organic ligands, inducing the formation of perovskite nanocrystals with quasi-core/shell structure. After thermal annealing, the MPEG-MAA with its CC bond can be polymerized to obtain a comb-like polymer, further protecting the passivated perovskite nanocrystals against water and oxygen. Finally, state-of-the-art green PeLEDs with a normal EQE of 25.2% and a maximum EQE of 28.1% are achieved, and the operating lifetime (T₅₀ ) of the device in air environment is over ten times increased, providing a novel and effective strategy to make high efficiency and long operating lifetime PeLEDs.