Deep-Red Perovskite Light-Emitting Diodes Based on One-Step-Formed γ-CsPbI<sub>3</sub> Cuboid Crystallites.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 34632635.
- Also identified by DOI 10.1002/adma.202105699.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Inorganic CsPbI<sub>3</sub> perovskite with high chemical stability is attractive for efficient deep-red perovskite light-emitting diodes (PeLEDs) with high color purity. Compared to PeLEDs based on ex-situ-synthesized CsPbI<sub>3</sub> nanocrystals/quantum dots suffering from low conductivity and efficiency droop under high current densities, in situ deposited 3D CsPbI<sub>3</sub> films from precursor solutions can maintain high conductivity but show high trap density. Here, it is demonstrated that introducing diammonium iodide can increase the size of colloids in the precursor solution, retard the phase-transition rate, and passivate trap states of the in-situ-formed cuboid crystallites. The PeLED based on the one-step-formed 3D CsPbI<sub>3</sub> cuboid crystallite films shows a peak external quantum efficiency (EQE) value up to 15.03% because of the high conductivity and reduced trap states. Furthermore, this one-step method also has a wide processing window, which is attractive for flow-line production of large-area PeLED modules. The fabrication of a 9 cm<sup>2</sup> PeLED that exhibits a peak EQE of 10.30% is successfully demonstrated.