Augmentation of Distal Biceps Tendon Ruptures With the Lacertus Fibrosus: A Biomechanical Study in a Tendon-Deficient Model.

Abstract

Chronic distal biceps tendon ruptures may require tendon graft augmentation secondary to tendon attrition or retraction. The lacertus fibrosus is a local, cost-effective graft that can be used to supplement reconstruction. To compare the biomechanical strength of distal biceps tendon repairs with and without lacertus fibrosus augmentation in a tendon-deficient cadaveric model. Controlled laboratory study. Sixteen fresh-frozen matched cadaveric pairs of elbows were randomized into 2 groups: (1) standard distal biceps tendon repair and (2) tendon-deficient (50% step cut) repair with lacertus fibrosus augmentation. All repairs were completed using an oval bone trough and 2 double-loaded No. 2 braided nonabsorbable sutures in a locked Krackow fashion tied over a lateral bone bridge. For the lacertus augmentation group, the lacertus was wrapped circumferentially in a tubular fashion around the tendon to restore the native size and incorporated into the Krackow suture. All specimens underwent cyclic loading and then were loaded to failure. Displacement, stiffness, load to failure, and mode of failure were recorded. The standard repair and lacertus augmentation groups had similar displacements on cyclic loading (1.66 ± 0.62 vs 1.62 ± 0.58 mm, respectively; <i>P</i> = .894). The stiffness was significantly greater for the standard repair group (21.3 ± 2.5 vs 18.5 ± 3.5 N/mm; <i>P</i> = .044). Both groups provided excellent mean peak load to failure strengths, despite the standard repair group having significantly greater strength (462.4 ± 140.5 vs 377.3 ± 101.1 N; <i>P</i> = .022). The primary mode of failure in the standard repair group was fracture at the bone bridge (n = 5/8) compared with suture pullout (n = 4/8) in the lacertus augmentation group. Lacertus fibrosus augmentation of a tendon-deficient biceps repair was less stiff and had lower mean load to failure compared with repair of the native tendon in this cadaveric model, but these values remained biomechanically acceptable above critical thresholds. Consequently, lacertus fibrosus augmentation is a viable option for chronic distal biceps tendon ruptures with tendon attrition. Chronic distal biceps tendon ruptures may require autograft or allograft reconstruction secondary to tendon scarring, shortening, attrition, and degeneration. The lacertus fibrosus is a cost-effective and low-morbidity local autograft that can be used to augment repairs.