A lateral fracture step-off of 2mm increases intra-articular pressure following tibial plateau fracture.

Abstract

The aim of this study was to evaluate the effects of increasing posttraumatic step-offs after lateral tibial plateau fracture reduction on the intra-articular pressure. In eight fresh-frozen human cadaveric knees with intact menisci, a standardized sagittal osteotomy of the lateral tibial condyle was performed as an OTA/AO type 41-B1 fracture-model. The fragment was fixed by a customized sled including an angular stable tibia plate to evaluate step-offs from 0 mm to 8 mm in 1mm increments. In a servo-hydraulic testing machine, an axial force was applied to the tibial plateau in 0° (700N), 15° (700N), 30° (700N), 60° (350N), and 90 ° (350N) of flexion while the joint pressure was recorded by two pressure sensors. A 1mm step-off did not result in an increased joint pressure. At 60° of flexion a 2mm step-off increased the lateral joint pressure by 61.84kPa (P = 0.0027). In 30° of flexion, a 3mm step raised the lateral joint pressure by 66.80kPa (p = 0.0017), whereas in 0°, 15° and 90° of flexion, a 4mm step increased the pressure by >50kPa (P < 0.05). Concomitant medial joint pressure increments were lower than those in the lateral plateau. A significant increase of 19-24kPa in the medial joint pressure was detected in 90° of flexion with a 1mm lateral step (P = 0.0075), in 15° and 60° of flexion with a 2mm step (P < 0.05), in 0° of flexion with a 4mm step (P = 0.0215) and in 30° of flexion with a 7mm step (P = 0.0487). Lateral fracture step-offs of 2mm or larger should be reduced intraoperatively to avoid large increases in lateral joint pressure.