Room-temperature atomic layer deposition of SiO₂ on microcracked ZrO₂ layers.

Abstract

Yttria-stabilized zirconia (Y-SZ) has become a reliable material option to restore severely compromised teeth. Y-SZ materials are prone to low-temperature degradation (LTD), which generates a tetragonal-to-monoclinic (t-m) transformed, porous layer. We suggest that room-temperature atomic layer deposition (RT-ALD) could be used for the infiltration and deposition of nanoscale SiO₂ film over this layer, creating a protective hybrid surface against further degradation by LTD. This study investigated the potential of developing a Y-SZ transformed layer under controlled conditions for the infiltration of silica using RT-ALD, aiming to develop a hybrid zirconia-silica interface, and to investigate the effect of silica deposition/infiltration via RT-ALD on the surface roughness and wettability of zirconia-based materials. Sintered specimens (14 mm × 4 mm x 2 mm) were prepared from four different Y-SZ materials (n = 40): low translucency 3 mol % Y-SZ (3Y-LT; Ceramill ZI, Amann Girrbach); high translucency 4 mol % Y-SZ (4Y-HT; Ceramill Zolid); and two high translucency 5 mol % Y-SZ (5Y-HT - Lava Esthetic, 3M; 5Y-SHT - Ceramill Zolid, FX white). Specimens were exposed to hydrothermal treatment (HTT) to develop similar depths of crystalline changes. RT-ALD was used to deposit a thin film of silica (SiO₂). Surface roughness and wettability analyses were performed to investigate the effect of treatment (HTT and RT-ALD) and material on Y-SZ surface properties, and data was analyzed by two-way ANOVA and Tukey HSD (p < 0.05). RT-ALD and HTT-RT-ALD treated specimens of 3Y-LT and 5Y-HT materials were exposed to further hydrothermal aging (HA) and the surface was characterized by time-of-flight secondary ion mass spectrometry (ToF-SIMS). There was a significant interaction effect of material and treatment (HTT and RT-ALD) on roughness (p = 0.02), and surface wettability (p < 0.001). Silica deposition via RT-ALD resulted in a significant increase in surface roughness of all materials tested, while surface wettability was either improved or not changed based on the material type and HTT exposure. Nanofilms of SiO₂ were successfully deposited on Y-SZ materials and infiltrated 3Y-LT zirconia.