A biomechanical study shows the direction of compression influences the amount of lordosis gained in lumbar fusion.

Abstract

Biomechanical model study. Lumbar lordosis is usually lost in the degenerative process, and when lumbar fusion is required, its restoration is one of the modern metrics of a successful operation. We sought to investigate the hypothesis that changing direction of compression during surgical fusion, would gain more lordosis. Using a biomechanical Sawbones™ model we inserted polyaxial pedicle screws from S1 to L4. A rod was placed in the screws without requiring reduction. Markers were attached to the spinous processes to allow photographic analysis of lordosis. Two methods were compared. Method A - caudal screws were locked first and compression proceeded in a cranial direction prior to locking. Method B - cranial screws were locked first and compression proceeded caudally. Increasing levels of surgical invasiveness were tested; intact, interbody cage, inferior facet resection, and Ponte resection and using different rods including: lordotic, hyperlordotic and straight. Method B demonstrated to be consistently superior to Method A, regardless of the type of rod used and for every level of surgical invasiveness performed. (P < 0.001). locking the top screws first was a consistently superior method of compression, gaining more lordosis. To explain this finding we suggest the following: During posterior compression of pedicle screws along a fixed rod, screw motion is limited by the conflict between the fixed lordotic rod position, and the need for the moving screw to move in a kyphotic arc which is determined by the cage which acts as a pivot point.