Macroscale Superlubricity Induced by MXene/MoS<sub>2</sub> Nanocomposites on Rough Steel Surfaces under High Contact Stresses.
biomechanical · Level V
Where this comes from
- Record sourced from PubMed, PMID 36696666.
- Also identified by DOI 10.1021/acsnano.2c09640.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Toward the goal of achieving superlubricity, or near-zero friction, in industrially relevant material systems, solution-processed multilayer Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub>-MoS<sub>2</sub> blends are spray-coated onto rough 52100-grade steel surfaces as a solid lubricant. The tribological performance was assessed in a ball-on-disk configuration in a unidirectional sliding mode. The test results indicate that Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub>-MoS<sub>2</sub> nanocomposites led to superlubricious states, which has hitherto been unreported for both individual pristine materials, MoS<sub>2</sub> and Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub>, under macroscale sliding conditions, indicating a synergistic mechanism enabling the superlative performance. The processing, structure, and property correlation were studied to understand the underlying phenomena. Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy revealed the formation of an <i>in situ</i> robust tribolayer that was responsible for the performance at high contact pressures (>1.1 GPa) and sliding speeds (0.1 m/s). This report presents the lowest friction obtained by either MoS<sub>2</sub> or MXene or any combination of the two so far.