Rationalized Electroepitaxy toward Scalable Single-Crystal Zn Anodes.

Abstract

Electroepitaxy is recognized as an effective approach to prepare metal electrodes with nearly complete reversibility. Nevertheless, large-scale manipulation is still not attainable owing to complicated interfacial chemistry. Here, the feasibility of extending Zn electroepitaxy toward the bulk phase over a mass-produced mono-oriented Cu(111) foil is demonstrated. Interfacial Cu-Zn alloy and turbulent electroosmosis are circumvented by adopting a potentiostatic electrodeposition protocol. The as-prepared Zn single-crystalline anode enables stable cycling of symmetric cells at a stringent current density of 50.0 mA cm^-2 . The assembled full cell further sustaines a capacity retention of 95.7% at 5.0 A g^-1 for 1500 cycles, accompanied by a controllably low N/P ratio of 7.5. In addition to Zn, Ni electroepitaxy can be realized by using the same approach. This study may inspire rational exploration of the design of high-end metal electrodes.