Speed whip ripstop technique during anterior cruciate ligament reconstruction using quadriceps tendon results in higher fixation strength.

Abstract

To compare the biomechanical strength of different fixation configurations using a suspensory button in a soft-tissue quadriceps tendon graft for Anterior Cruciate Ligament (ACL) reconstruction. Thirty fresh-frozen bovine Achilles tendons (10 mm wide, 50 mm long, and 4 mm thick) were used in this study. Tendons were assigned to three groups (n = 10 per group) with different suture configurations using adjustable loops with a suspensory button: group A, with the threads of an adjustable loop fixed by crossing at the tip of the loop and the entire loop; group B, continuous loops with hanging buttons were directly sutured to the tendon with eight simple sutures; group C, fixation was performed using the speed whip ripstop technique. Tensile tests with five cycles of preloading were performed at 50 N, held at 50 N for 1 min, and load-to-failure testing was conducted until rupture at 5 mm/min. The difference in the elongation and the maximum load-to-failure force were measured. The average elongation was significantly larger in group B (16.6 ± 2.2 mm) than in groups A (10.3 ± 2.4 mm) and C (10.0 ± 1.0 mm), (p < 0.001). The average load-to-failure force varied significantly between the three groups, 157.5 ± 33.4 N in group A, 253.4 ± 45.5 N in group B, and 337.7 ± 21.0 N in group C, (p < 0.001). Fixation using the speed whip ripstop technique to fix the suspensory button and soft-tissue transplant tendon resulted in minimal elongation and higher fixation strength. Simple devices that use this method have already been developed. Since it can be fixed using a relatively simple method, speed whip ripstop technique was shown to be advantageous for femoral fixation in ACL reconstruction using soft-tissue quadriceps tendon. The findings of this study could help surgeons reduce graft re-tear rates in ACL reconstruction using quadriceps tendons. N/A, laboratory control study.