Reducing Perovskite/C<sub>60</sub> Interface Losses via Sequential Interface Engineering for Efficient Perovskite/Silicon Tandem Solar Cell.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 37938798.
- Also identified by DOI 10.1002/adma.202308370.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Wide-bandgap (WBG) perovskite solar cells hold tremendous potential for realizing efficient tandem solar cells. However, nonradiative recombination and carrier transport losses occurring at the perovskite/electron-selective contact (e.g. C<sub>60</sub> ) interface present significant obstacles in approaching their theoretical efficiency limit. To address this, a sequential interface engineering (SIE) strategy that involves the deposition of ethylenediamine diiodide (EDAI<sub>2</sub> ) followed by sequential deposition of 4-Fluoro-Phenethylammonium chloride (4F-PEACl) is implemented. The SIE technique synergistically narrows the conduction band offset and reduces recombination velocity at the perovskite/C<sub>60</sub> interface. The best-performing WBG perovskite solar cell (1.67 eV) delivers a power conversion efficiency (PCE) of 21.8% and an impressive open-circuit voltage of 1.262 V. Moreover, through integration with double-textured silicon featuring submicrometer pyramid structures, a stabilized PCE of 29.6% is attained for a 1 cm<sup>2</sup> monolithic perovskite/silicon tandem cell (certified PCE of 29.0%).