Statistical distribution of micro and macro pores in acrylic bone cement- effect of amount of antibiotic content.
biomechanical · Level V
Where this comes from
- Record sourced from PubMed, PMID 38100980.
- Also identified by DOI 10.1016/j.jmbbm.2023.106297.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Aseptic loosening due to mechanical failure of bone cement is considered to be a leading cause of revision of joint replacement systems. Detailed quantified information on the number, size and distribution pattern of pores can help to obtain a deeper understanding of the bone cement's fatigue behavior. The objective of this study was to provide statistical descriptions for the pore distribution characteristics of laboratory bone cement specimens with different amounts of antibiotic contents. For four groups of bone cement (Palacos) specimens, containing 0.3, 0.6, 1.2 and 2.4 wt/wt% of telavancin antibiotic, seven samples per group were micro computed tomography scanned (38.97 μm voxel size). The images were first preprocessed in Mimics and then analyzed in Dragonfly, with the level of threshold being set such that single-pixel pores become visible. The normalized pore volume data of the specimens were then used to extract the logarithmic histograms of the pore densities for antibiotic groups, as well as their three-parameter Weibull probability density functions. Statistical comparison of the pore distribution data of the antibiotic groups using the Mann-Whitney non-parametric test revealed a significantly larger porosity (p < 0.05) in groups with larger added antibiotic contents (2.4 and 0.6 wt/wt% vs 0.3 wt/wt%). Further analysis revealed that this effect was associated with the significantly larger frequency of micropores of 0.1-0.5 mm diameter (p < 0.05) in groups with larger antibiotic content (2.4 wt/wt% vs and 0.6 and 0.3 wt/wt%), implying that the elution of the added antibiotic produces micropores in this diameter range mainly. Based on this observation and the fatigue test results in the literature, it was suggested that micropore clusters have a detrimental effect on the mechanical properties of bone cement and play a major role in initiating fatigue cracks in highly antibiotic added specimens.
Medical subject headings
- Polymethyl Methacrylate
- Odonata