Ionic Conduction-Based Polycrystalline Oxide Gamma Ray Detection - Radiation-Ionic Effects.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 38380958.
- Also identified by DOI 10.1002/adma.202309253.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Newly discovered opto-ionic effects in metal oxides provide unique opportunities for functional ceramic applications. The authors generalize the recently demonstrated grain boundary opto-ionic effect observed in solid electrolyte thin films under ultraviolet (UV) irradiation to a radiation-ionic effect that can be applied to bulk materials and used for gamma-rays (γ-rays) detection. Near room temperature, lightly doped Gd-doped CeO<sub>2</sub>, a polycrystalline ion conducting ceramic, exhibits a resistance ratio change ≈10<sup>3</sup> and reversible response in ionic current when exposed to <sup>60</sup>Co γ-ray (1.1 and 1.3 MeV). This is attributed to the steady state passivation of space charge barriers at grain boundaries, that act as virtual electrodes, capturing radiation-induced electrons, in turn lowering space charge barrier heights, and thereby exclusively modulating the ionic carrier flow within the ceramic electrolytes. Such behavior allows significant electrical response under low fields, that is, < 2 V cm<sup>-1</sup>, paving the way to inexpensive, sensitive, low-power, and miniaturizable solid-state devices, uniquely suited for operating in harsh (high temperature, pressure, and corrosive) environments. This discovery presents opportunities for portable and/or scalable radiation detectors benefiting geothermal drilling, small modular reactors, nuclear security, and waste management.