Overcoming limitations in propane dehydrogenation by codesigning catalyst-membrane systems.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 38513015.
- Also identified by DOI 10.1126/science.adh3712.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Propylene production through propane dehydrogenation (PDH) is endothermic, and high temperatures required to achieve acceptable propane conversions lead to low selectivity and severe carbon-induced deactivation of conventional catalysts. We developed a catalyst-membrane system that removes the hydrogen by-product and can thus achieve propane conversions that exceed equilibrium limits. In this codesigned system, a silica/alumina (SiO<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub>) hollow-fiber hydrogen membrane was packed with a selective platinum-tin (Pt<sub>1</sub>Sn<sub>1</sub>/SiO<sub>2</sub>) PDH catalyst on the tube side with hydrogen diffusing from the tube to the shell side. We demonstrate that the catalyst-membrane system can achieve propane conversions >140% of the nominal equilibrium conversion with a propylene selectivity >98% without deactivation of the system components. We also show that by introducing oxygen on the shell side of the catalyst-membrane system, we can couple the endothermic PDH reaction on the tube side with exothermic hydrogen oxidation on the shell side. This coupling results in higher rates of hydrogen transport, leading to further enhancements in the propane conversion as well as desired thermoneutral system operation.