Hybrid-Electrolytes System Established by Dual Super-lyophobic Membrane Enabling High-Voltage Aqueous Lithium Metal Batteries.

Abstract

Aqueous electrolytes and related aqueous rechargeable batteries own unique advantage on safety and environmental friendliness, but coupling high energy density Li-metal batteries with aqueous electrolyte still represent challenging and not yet reported. Here, this work makes a breakthrough in "high-voltage aqueous Li-metal batteries" (HVALMBs) by adopting a brilliant hybrid-electrolytes strategy. Concentrated ternary-salts ether-based electrolyte (CTE) acts as the anolyte to ensure the stability and reversibility of Li-metal plating/stripping. Eco-friendly water-in-salt (WiS) electrolyte acts as catholyte to support the healthy operation of high-voltage cathodes. Most importantly, the aqueous catholyte and non-aqueous anolyte are isolated in each independent chamber without any crosstalk. Aqueous catholyte permeation toward Li anode can be completely prohibited without proton-induced corrosion, which is enabled by the introduction of under-liquid dual super-lyophobic membrane-based separator, which can realize the segregation of the most effective immiscible electrolytes with a surface tension difference as small as 6 mJ m^-2. As a result, the aqueous electrolyte can be successfully coupled with Li-metal anode and achieve the fabrication of HVALMBs (hybrid-electrolytes system), which presents long-term cycle stability with a capacity retention of 81.0% after 300 cycles (LiNi_0.8Mn_0.1Co_0.1O₂ || Li (limited) cell) and high energy density (682 Wh kg^-1).