Biomechanical study of 3D-printed titanium alloy pad for repairing glenoid bone defect.

Abstract

<b>Background:</b> The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. <b>Methods:</b> The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. <b>Results:</b> The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (<i>p</i> < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (<i>p</i> < .05). However, there was no significant difference in humerus displacement between groups D and A (<i>p</i> > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (<i>p</i> < .05). <b>Conclusion:</b> The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.