Relative contribution of the nail and plate to a nail-plate construct for comminuted distal femoral fractures.

Abstract

The purpose of this study was to assess the biomechanical contributions of the nail and the plate individually to a complete nail-plate construct in the setting of comminuted distal femur fractures. For this biomechanical study, comminuted extra-articular distal femur fractures were created in 24 synthetic osteoporotic femur models. These were then split into three groups: the nail-only group, the plate-only group, and the nail-plate group. After fixation, each specimen underwent sequential axial and torsional loading, and axial and torsional stiffness were calculated and compared. The addition of a nail to a plate-only construct increased axial stiffness by 19.7% and torsional stiffness by 59.4%. The plate-only group and nail-plate group both demonstrated significantly greater axial and torsional stiffness than the nail-only group at all levels of axial and torsional load. (p < 0.001) At 1000 and 2000 N of cyclic loading, the nail-plate group demonstrated significantly greater axial stiffness than the plate-only group (p ≤ 0.018). The nail-plate group demonstrated greater torsional stiffness than the plate-only groups at all levels of torsional loading (p < 0.001). In osteoporotic comminuted distal femur fracture models, most of the axial stiffness in a nail-plate construct comes from the plate. While the combination of the two constructs is not fully additive, the plate contributes the majority of the axial and torsional stiffness in a nail-plate construct. The supplementation of the plate with a nail primarily helps to increase resistance to rotational forces. Level of Evidence: III.