Silicon Waveguide-Integrated Platinum Telluride Midinfrared Photodetector with High Responsivity and High Speed.

Ma, Lingxiao; Lin, Shuo; Ma, Hui; Liao, Jie; Ye, Yuting; Jian, Jialing; Li, Junying; Wang, Pengjun et al. · ACS Nano · 2024

basic_science · Level V

Where this comes from

Abstract

The detection of mid-infrared light, covering a variety of molecular vibrational spectra, is critical for both civil and military purposes. Recent studies have highlighted the potential of two-dimensional topological semimetals for mid-infrared detection due to their advantages, including van der Waals (vdW) stacking and gapless electronic structures. Among them, mid-infrared photodetectors based on type-II Dirac semimetals have been less studied. In this paper, we present a silicon waveguide integrated type-II Dirac semimetal platinum telluride (PtTe<sub>2</sub>) mid-infrared photodetector, and further improve detection performance by using PtTe<sub>2</sub>-graphene heterostructure. For the fabricated silicon waveguide-integrated PtTe<sub>2</sub> photodetector, with an external bias voltage of -10 mV and an input optical power of 86 nW, the measured responsivity is 2.7 A/W at 2004 nm and a 3 dB bandwidth of 0.6 MHz is realized. For the fabricated silicon waveguide-integrated PtTe<sub>2</sub>-graphene photodetector, as the external bias voltage and input optical power are 0.5 V and 0.13 μW, a responsivity of 5.5 A/W at 2004 nm and a 3 dB bandwidth of 35 MHz are obtained. An external quantum efficiency of 119% can be achieved at an input optical power of 0.376 μW.