Ultra-High-<i>k</i> Ferroelectric BaTiO<sub>3</sub> Perovskite in the Gate Stack for Two-Dimensional WSe<sub>2</sub> p-Type High-Performance Transistors.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 39351895.
- Also identified by DOI 10.1021/acs.nanolett.4c02069.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
The experimental demonstration of a p-type 2D WSe<sub>2</sub> transistor with a ferroelectric perovskite BaTiO<sub>3</sub> gate oxide is presented. The 30 nm thick BaTiO<sub>3</sub> gate stack shows a robust ferroelectric hysteresis with a remanent polarization of 20 μC/cm<sup>2</sup> and further enables a capacitance equivalent thickness of 0.5 nm in the hybrid WSe<sub>2</sub>/BaTiO<sub>3</sub> stack due to its high dielectric constant of 323. We demonstrate one of the best ON currents for perovskite gate 2D transistors in the literature. This is enabled by high-quality epitaxial growth of BaTiO<sub>3</sub> and a single 2D layer transfer based fabrication method that is shown to be amenable to silicon platforms. This demonstration is an important milestone toward the integration of crystalline complex oxides with 2D channel materials for scaled CMOS and low-voltage ferroelectric logic applications.