Anterior and coracoid base tunnel location combined with single -or double clavicular tunnel techniques using double-button fixation for coracoclavicular ligament reconstruction both restore horizontal stability. A biomechanical cadaver study.
biomechanical · Level V
Where this comes from
- Record sourced from PubMed, PMID 39418675.
- Also identified by DOI 10.1016/j.clinbiomech.2024.106363.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
The placement of clavicle tunnels in coracoclavicular ligament reconstruction is well established, but the optimal position of the coracoid tunnel remains unclear. This study aimed to investigate how the coracoid tunnel's position affects horizontal stability during coracoclavicular ligament reconstruction using a double-button technique. Fifteen fresh frozen shoulder cadaver specimens were tested under various conditions: intact coracoclavicular ligaments, disrupted ligaments, and reconstructions with a single coracoid and clavicle tunnel or double clavicle tunnels. The coracoid tunnel was positioned at the coracoid base 1/9, and 1/5 anterior to the base. Specimens underwent displacement-controlled loading, with 2D motion analysis conducted on captured digital images using TEMA motion analysis. Mean displacement for intact coracoclavicular ligaments was 1.61 ± 0.92 mm, and 3.69 ± 1.09 mm for disrupted ligaments. For reconstructed conditions, displacements were as follows: Single-Tunnel Base (1.87 ± 0.64 mm), Single-Tunnel 1/9 (2.54 ± 1.13 mm), Single-Tunnel 1/5 (2.62 ± 1.17 mm), Double-Tunnel Base (1.25 ± 0.73 mm), Double-Tunnel 1/9 (2.03 ± 1.22 mm), and Double-Tunnel 1/5 (1.88 ± 1.20 mm). Differences among intact, reconstructed, and disrupted states were statistically significant (p = 0.01-0.0001), with all reconstruction techniques restoring horizontal displacement near the intact state. At point zero both single coracoid tunnel and single- and double-clavicle tunnel restored horizontal displacement to its intact state. Coracoid tunnel placement anterior to the base of the coracoid did not influence horizontal displacement but single coracoid at the coracoid base and single clavicle tunnel resulted in the most anatomic reconstruction. Single coracoid tunnel at the base and double-clavicle resulted in the most stable reconstruction.
Medical subject headings
- Clavicle
- Cadaver
- Ligaments, Articular
- Coracoid Process
- Plastic Surgery Procedures
Anatomy
- clavicle