Optimization and CFD-RSM analysis of single orifice reactor for enhanced biodiesel production.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 40601772.
- Also identified by DOI 10.1371/journal.pone.0326747 and PMC identifier 12221185.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Depleting fossil fuels necessitate innovative solutions for sustainable biodiesel production from sunflower oil, addressing global energy and environmental challenges. Computational Fluid Dynamics (CFD) with the k-ε model and Response Surface Methodology (RSM) optimized frequency (5-15 Hz), baffle diameter ratio (d₀/D: 0.4-0.8 mm), and baffle spacing (3-7 mm) in a single-orifice oscillatory flow reactor (OFR). Optimal conditions (frequency = 12.12 Hz, d₀/D = 0.4 mm, spacing = 10 mm) achieved an 83% biodiesel conversion, maximum turbulent kinetic energy (TKE) of 7.56 m²/s², maximum vorticity of 112.23 1/s, and energy dissipation of 359.82 m²/s³, validated by a TKE-yield correlation (R² = 0.972). Simplified reactor design reduces energy dissipation by 20% compared to multi-orifice reactors (88% yield, higher costs) and smooth periodic constriction reactors (74.5% yield). Findings offer a scalable, eco-friendly solution for industrial biodiesel production, minimizing fossil fuel dependency and enhancing process efficiency.
Medical subject headings
- Biofuels
- Hydrodynamics
- Bioreactors