Washable heat-resistant and inkjet-printed devices on cotton fabric for wearable applications.
basic_science · Level V
Where this comes from
- Record sourced from PubMed, PMID 41022767.
- Also identified by DOI 10.1038/s41467-025-63636-3 and PMC identifier 12480038.
- Licence recorded as CC BY-NC-ND.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
Electronic textiles (e-textiles) face challenges in maintaining fabric properties and achieving high electrical conductivity with screen printing and particle-based inkjet printing. While particle-free reactive inks enable high-resolution patterning with sufficient electrical conductivity, their application on cellulose-based fibers is hindered by negatively charged surfaces. This study introduces inkjet-printed e-textiles using reactive silver ink and carbon nanotube ink on poly-L-lysine-coated cotton fabric. Carbon nanotubes establish a conductive network that promotes silver ion reduction, yielding densely packed nanoparticles with enhanced conductivity (1.25 × 10⁵ S m⁻¹). The resulting composite functions as a resistive tactile sensor with high sensitivity (6.02 kPa⁻¹) due to the hierarchical structure of cotton fabric. In addition, the inherent heat resistance of cotton facilitates its high-temperature resistance during heating. In this work, the fabricated e-textiles maintain performance through bending, ironing, and washing, inferring our printing technique as a promising strategy for wearable devices.