Ferromagnetic high-permeability alloy alone can provide sufficient low-frequency and eddy-current shieldings for biomagnetic measurements.
biomechanical · Level V
Where this comes from
- Record sourced from PubMed, PMID 7927390.
- No licence information is recorded for this record.
- Because redistribution is not established, this page shows the abstract only. Follow the links below for the full text.
Abstract
A low cost, two-shell ferromagnetic shielded room large enough for a person to enter and prepare experiments was constructed for biomagnetic measurements. No aluminium or copper shell was used for eddy-current shielding. A high-permeability nickel-iron-molybdenum alloy (1.57 mm thick) was used for both ferromagnetic and eddy-current shieldings. The shielding factor was 60 dB at dc and 40 dB between 0.1 Hz and about 3 Hz. The eddy-current shielding due to the alloy alone provided a shielding factor of 55 dB at 30 Hz and 66 dB at 60 Hz. The shielding factor was sufficiently high in all the frequency range for biomagnetic measurements with a first-order superconducting gradiometer.
Medical subject headings
- Alloys
- Environment, Controlled
- Facility Design and Construction
- Magnetics