Y-TZP ceramics for artificial joint replacements.

Abstract

Due to their excellent mechanical properties, Yttria-stabilized Tetragonal Zirconia Polycrystal ceramics (Y-TZP) are used in ball heads for Total Hip Replacements. It is known that Y-TZP materials may show strength degradation due to ageing or to hydrothermal treatment. Also high wear of UHMWPE sockets coupled to steam sterilized Y-TZP ball heads after a short implantation period was recently reported. This effect may be related to ball head surface phase transformation, due to corrosive attack. The aim of this study is the evaluation of Y-TZP ceramics stability. Y-TZP made out of Yttria coated powders were aged at 140 degrees C under 0.2 MPa water pressure, in Ringer's solution at 37 degrees C, in NZW rabbits. Samples made out Yttria coated powders show lower strength degradation than samples made out coprecipitated powders, and UHMWPE discs coupled to Y-TZP rings made out coated powders do not show increase in wear after repeated sterilization cycles of the ceramic rings.